Reliable Data-Logger DL-04 Manuel de l'opérateur télécharger pdf (Page 20)

Q-DL-2100 Operatorʼs Manual

Quaesta Instruments, LLC (520) 449-3806 • Email: support@quaestainstruments.com

2.7 Remote Communication

Using Integrated Iridium Satellite modem.

Description to be added soon.

Using Integrated Cell Phone modem.

Description to be added soon.

Using External Teltonika WirelessCOM/ G10 GSM modem.

The Teltonika WirelessCOM/G10 GSM modem allows one to connect to the

datalogger from a remote location via an IP address.

Using appropriate software, such as Hyperterminal or Tera Term Pro, a terminal

interface connection can be initiated in the same manner as if one was directly connected

with a PC to either the dataloggerʼs USB COM port or one of its RS-232 interfaces via the

datalogger backpanelʼs RS-232 connector.

Follow the directions in the Teltonika documentation for configuring the

WirelessCOM/G10 device. Set the parameters as below:

Baud Rate: 19200

Data Bits: 8

Parity: None

Stop Bits: 1

Flow Control: None

The following INI parameters should also be configured:

UseSatModem=0

UseRS232=1

RS232BaudRate=19200 (baud rate must be greater than or equal to 19200)

Connect an appropriate cable between the dataloggerʼs RS-232 interface Jack and the

Wireless COM/G10 device.

Assuming the datalogger is on and GSM service is available, one should now be able to

communicate remotely from the datalogger via a terminal emulation program capable of

TCP/IP communication. HyperTerminal and Tera Term Pro both support the TCP/IP

communications interface option.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 36 37

Pas de commentaire

Reliable Data-Logger DL-04 Manuel de l'opérateur Page 20